Mechanical engineering is the discipline that applies engineering, physics, and materials science principles to design, analyze, manufacture, and maintain mechanical systems. It is one of the oldest and broadest of the engineering disciplines. Mechanical Engineering is the  branch of engineering concerned primarily with the industrial application of mechanics and with the production of tools, machinery, and their products.The mechanical engineering field requires an understanding of core areas including mechanics, dynamics, thermodynamics, materials science, structural analysis, and electricity. In addition to these core principles, mechanical engineers use tools such as computer-aided design , and product life cycle management to design and analyze manufacturing plants, industrial equipment and machinery, heating and cooling systems, transport systems, aircraft, watercraft, robotics, medical devices, weapons, and others. It is the branch of engineering that involves the design, production, and operation of machinery. Just follow the Mcqs online quiz being dispatched over here with respect to your preparation for entry admission test NTS PPSC OTS PTS and missllenous job exams simultaneously.

Here we have large collection of Mechanical Engineering Mcqs for all Students and jobs test preparation purpose. These Mechanical Engineering Mcqs will be updated on daily basis and added more multiple choice question about Mechanical Engineering frequently.You can prepare your Mechanical Engineering Subject for different classes like 9th class, 10th class ,11th class 12th class exams, Entry Test like MCAT NTS ,OTS ,PTS ,BTS, GTS, Jobs Test,Recruitment Test like PPSC CSS FPSC SPSC KPPSC and interviews here.

Mechanical Engineering Mcqs Online With  Answers for NTS PPSC Entry Test Classes

Mechanical Engineering

Mechanical Engineering Mcqs with Answers Solved

Micro-controllers are ________________ than the PLCs.

The hydrostatic law states that rate of increase of pressure in a vertical direction is equal to?

Which cycle is more suitable for the reciprocating engines?

Absolute pressure is measured as?

The critical radius of a hollow sphere having thermal conductivity k and ho as convecting heat transfer coefficient of outer fluid is given by?

The shear stress velocity gradient relation of the Newtonian fluids is?

What is the head of water available at turbine inlet in hydro-electric power plant called?

Which of the following can be considered as more compact efficient heat exchanger?

A perfect gas?

Secondary force in reciprocating engine mechanism is caused due to?

The horizontal component of force on a curved surface is equal to the?

In turbofan engine, the bypass ratio is the ratio of?

Angle of swash plate in axial piston pump is adjusted by?

Gas welding is a type of?

Shape factor is also called as?

Shear stress energy theory is called as?

Which of the following methods can be used to control the noise level at source?

When two vapor cycles are coupled in series and heat rejected by one is absorbed by another, the cycle is called as?

If a barometer carries wter instead of mercury, the height of column for a pressure equivalent to 75 cm of mercury will be?

he materials such as lead and barium, which are added with polymers to minimize the effect of heat, sunlight and ozone are called as?

What is the ratio of amplitude of response to that of the input called?

1 mm Hg pressure is equivalent to?

Which type of tolerance does a slip gauge have?

Low-torque high-speed motors are used in?

Energy is not conserved but destroyed in the process. What is the reason behind this?

A hydrometer is used to determine?

According to Taylor’s principle which type of gauge checks both size and geometric features?

Which design consideration deals with appearance of the product?

In working condition of turbojet engine, velocity of air entering the engine is?

Which among the following is the fundamental equation of S.H.M.?

The ratio of actual whirl velocity to the ideal whirl velocity in the centrifugal compressor is called as?

Which of the following components are inspected by a Tool maker’s microscope?

What is the ratio of maximum velocity to average velocity, when the fluid is passing through two parallel plates and flow is laminar?

If welds are designed with in-plane eccentric load, then eccentric load can be replaced by?

Which of the following factors increases hardenability of a metal?

The quality of vapour at the exit of nozzle ___________ due to nozzle friction.

The compressor in the vapour compression system is replaced by?

The depth of oil having specific gravity 0.6 to produce a pressure of 3.6 kg/cm2 will be?

The gates of aerofoil section in between the outer and inner ring of guide wheel are called as?

What are the minimum number of kinematic pairs required in a kinematic chain?

In the metal cutting process, when the compression limit of the metal in front of the cutting tool has been exceeded then it is separated from workpiece and flows?

Which of the following is not a part of carriage of the centre lathe?

If a relief valve has reliability of 0.989, how many failures are expected in testing 1000 such relief valves?

In a flowing fluid, a particle may possess?

The layer above the laminar sublayer with some turbulence and still having importance of viscous action is called as?

Which of the following protects penstock due to sudden variation of flow or velocity of water?

The vertical component of pressure force on a submerged curved surface is equal to?

In roller bearings which type of rolling elements are used?

Which force causes vanes to come out of the rotor slots?

SI unit of viscosity is?

Which flat belt drive system has two pulleys mounted on driven shaft and one pulley on driving shaft?

Which of the following is used as an accessory in hydraulic power unit?

The dew point temperature is less than the wet bulb temperature for?

The sum of components of shear forces in the direction of flow of fluid is called as?

The dynamic viscosity of most of the gases with rise in gas temperature?

Which of the following materials is/are used to make an angle gauge block?

A hydro-electric site has a head of 100 m and an average discharge of 10m3/s. Assume 92% efficiency, for a greater speed of 6000 rpm, the specific speed of turbine would be?

Which of the following is α – β brass?

The process in which no heat transfer takes place through boundaries is called as?

In natural convection, the Nusselt number (Nu) depends on?

What is an ideal fluid?

Which type of frequency measuring instrument has multiple reeds of different natural frequency to measure vibrations?

The continuity equation?

Why are rigid couplings used?

The radiation heat exchange between two bodies depends upon?

Which of the following vibrometers have frequency ratio (ω/ωn) << 1?

What causes infant mortality in mechanical equipments?

Which of the following energy conversion devices convert heat into work?

The normal stress is the same in all directions at a point in fluid?

Which of the following instruments is used to measure base pitch of a gear in base tangent method?

Knife Line Attack is a type of?

Mechanical working processes are performed on metals?

The angle between side cutting edge and end cutting edge is called as?

Several machine tools can be controlled by a central computer in?

In a steady, ideal flow of an incompressible fluid, total energy at any point of the fluid is always constant. This theorem is known as?

Solid length for helical compression springs having square and ground ends is given as?

At the maximum inversion temperature in the graph of isenthalpic or joule-kelvin expansion of a gas, the value of Joule-Kelvin coefficient is?

The thickness of layer material removed in one pass of workpiece under the cutter is called as?

In isentropic flow, the temperature?

Which of the following is/are example/s of direct contact type heat exchanger?

In which of these applications Bernoulli’s principle is widely used?

The volute pumps and vortex volute pumps are __________ pumps with _________ shaft.

Magnitude of eddy viscosity for laminar flow is?

What is quality assurance?

Why are mechanical springs used?

Which of the following is tested for parallelism between trajectory and a plane?

A stationary body immersed in a river has a maximum pressure of 69 Kpa exerted on it at a distance of 5.4 m below the free surface. What velocity of river could be expected ?

The moisture content lines in psychrometric chart are also called as?

According to Archimede’s principle, if a body is immersed partially or fully in a fluid then the buoyancy force is _______ the weight of fluid displaced by the body.

Alcohol is used in manometers because?

Adding an additive to water glycol fluids improves?

The vapour absorption refrigeration system is?

The hydraulic system is?

Select the quantity in the following that is not a dimensionless parameter?

Modulus of resilience is the ratio of?

Determine logarithmic decrement, if the amplitude of a vibrating body reduces to 1/6th in two cycles.

Select the statement which is correct?

Which of the following assumptions are made in torsion theory?

Assume that a reversible heat engine is operating between a source at T1 and a sink at T2. If T2 decreases, the efficiency of the heat engine?

1 lb/in2 pressure is equivalent to?

Please Refresh the Page for more and new Mechanical Engineering Mcqs. Every time when you refresh the page you have new Mcqs for preparation.